Martindale HPAT500-2 Portable Appliance Tester

Martindale HPAT500-2 Portable Appliance Tester

Product Code: MARHPAT500-2

Price

£339.95 ex. VAT £407.94 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

The HPAT500 is an easy to use battery powered, hand held PAT tester with simple one-button test selection. It’s lightweight portable design make it ideal for testing in all locations whether under a desk or testing a wall mounted monitor. The tester comes with rechargeable batteries and mains charger for low cost of ownership and can even be used whilst recharging ensuring no downtime.

A single button press activates either a full Class I, Class II or lead test without any further interaction required by the user, unless a failure is encountered. The display has clear PASS / FAIL indicators and shows all test results on screen. Simple connection diagrams are permanently shown on the case body making it easy to start testing straight away. This is an ideal tester for the occasional or low volume tester. A comprehensive range of optional adaptor leads are available enabling 110V appliance testing and testing of equipment terminated with 3 phase plugs.

Key Features:

Compact design with backlit display
Easy one button testing
Automatic Class I, Class II & power lead tests
Measured values with clear PASS/FAIL indication
200mA earth bond test - I.T. Safe
250V / 500V insulation test
Mains rechargeable
New high contrast backlit display
Now includes 250v and 500v insulation tests

HPAT500-2 Comes Supplied With:

Mains charger
TL67 earth bond probe
6 x AA NiMH rechargeable batteries
EX322 IEC adaptor lead
TC68 carry case

HPAT selection

Martindale HPA500 Portable Appliance Tester
Earth Continuity
Test Voltage	4V DC (into open circuit)
Test Current	200mA DC (into short circuit)
Range	0 to 19.99Ω
Resolution	0.01Ω
Accuracy	± (5% of reading + 2 digits)
Fixed Pass Limits
Lead	≤ 0.10 Ω = PASS ≤ 0.20 Ω = NOTE x.xx PASS
Class I	Class I ≤ 0.10 Ω = PASS ≤ 0.20 Ω = NOTE x.xx PASS
Insulation
Fixed Voltage	>500V DC at 1mA (< 600V DC into open circuit)
Test Current	Test current: 1.5mA (into short circuit)
Ranges	2.00MΩ, 20.0MΩ, 200MΩ
Resolution	0.01MΩ
Accuracy	<100MΩ ± (5% reading + 2 digits) >100MΩ ± (10% reading + 2 digits)
Fixed Pass Levels	Lead: ≥ 1.0 MΩ Class I: ≥ 1.0 MΩ Class II: ≥ 2.0 MΩ
Fuse Checks
Test Voltage	4V DC (into open circuit)
Test Current	200mA DC (into short circuit)
Pass Level	>2mA
General
Overload Protection	300V AC/DC
Protection Class	IP20
Safety	Complies to BS EN 61010-1: 2001
Temperature Range	-10 to 40°C, non-condensing
Batteries	6 x 1.2V AA NiMH rechargeable batteries 1800mAh, or greater
Battery Life	Fully charged, minimum 600 complete tests. The HPAT500 will operate fully from the battery charger in the event of discharged batteries. Do not remove batteries.
Auto Shut Down	After 10 minutes of inactivity, or when battery low
Battery Charger Input	230V 50Hz
Battery Charger Output	12VDC at 300mA, 5.5 jack x 2.5 bore centre positive
Dimensions	90 x 210 x 54mm
Weight	Approx 700g (including batteries & leads)