Martindale TEK500 Microwave Leakage Detector Kit

Product Code: MARTEK500

Price

£182.95 ex. VAT £219.54 inc. VAT

In Stock

The Martindale TEK500 is a straightforward microwave leakage detector, which gives a simple LED indication as to leakage levels and is suitable for use with both commercial and domestic microwave ovens. The unit is designed to comply with national standards on permitted exposure levels.

A self test feature simulates a real microwave input, in order to ensure the unit is working correctly at all times and the leakage tester will indicate at 1, 5 and 10mW/cm², testing to BS5175.

The test procedure for microwave ovens also includes checking that the microwave is heating correctly. The TEK500 includes a beaker and digital thermometer in order for these tests to be carried out and to ensure your compliance with the testing requirements.

The Martindale TEK500 microwave leakage detector kit is supplied with the leakage detector, beaker, digital thermometer, carry case & instruction manual. The manual also includes the calculations to apply when measuring the microwave output.

Martindale TEK500 Microwave Leakage Tester
Compliance	BS EN 6033-2-25: 2002 and BS EN 60335-2-90: 2002
Supply	9V Alkaline Battery, MN1604 or Equivalent (Included)
Frequency of Operation	2450 ± 25MHz
Power Density Range	±1dB for Planewave of all Polarisations
Cardinal Points	>1mW/cm2, >5mW/cm2, 10mW/cm2
Response to Step Input	2-3 Seconds to Reach 90% of Steady State Indication
Overload Capacity	50mW/cm2
Indicators	LED (Green) - Battery OK LED (Yellow) - 1mW/cm2 - Acceptable Microwave Leakage Below Safety Limit LEDs (Red) - 5 and 10mW/cm2 and Audible Tone - Hazardous Microwave Leakage Above Safety Limit
Cone Spacer	Prescribed Test Distance of 50mm is Achieved When Cone Tip is in Contact with Appliance
Operating Temperature	-5 to 40°C
Case	Yellow FR ABS
Dimensions	145 x 64 x 30mm