TSI Airflow 8455-075-1 Air Velocity Transducer

Product Code: TSI8455075-1

Price
£705.00 ex. VAT £846.00 inc. VAT

Available In 3-7 Days


Add To Favourites
Detailed Description

The Air Velocity Transducer 8455 (general purpose) is ideal for both temporary and permanent installations for air velocity measurements in research and development labs, manufacturing processes, and other applications. Model 8455 contains on-board electronics and calibration curves that provide a linear signal output. This linear signal is sent out as either a current (mA) or a voltage (V) signal, allowing output to a variety of data loggers or data acquisition systems. Best of all, the current and voltage output ranges are easily changed by the user in under five minutes.

Ideal applications include comfort and draft studies, critical environment installations (e.g., clean rooms and hospitals), diffuser design analysis, monitoring drying processes, monitoring air flows in tunnels and subways, used as a standard in wind tunnels and calibration facilities, environmental monitoring in greenhouses and IAQ applications as well as general engineering applications.

TSI 0455-075-1 Comes Supplied With:

  • Probe attached to 16.4-ft (5-m) cable connected to control module
  • Compression fittings for mounting in duct work
  • Two holding clips to mount probe to parallel surface
  • Operation and service manual
  • NIST calibration certificate
  • Two-year limited warranty

Key Features:

  • Accuracy
    • ±2.0% of reading, ±0.5% of full scale (8455 & 8465)
    • ±3.0% of reading, ±1.0% of full scale (8475)
  • Field Selectable Range
    • 25 ft/min up to 10,000 ft/min (8455 & 8465)
    • 10 ft/min up to 500 ft/min (8475)
  • Repeatability
    • < ±1% of reading (8455 & 8465)
    • N/A (8475)
  • Response to Flow
    • 0.2 seconds (8455 & 8465)
    • 5 seconds (8475)
  • 0.07% of selected full scale minimum resolution
  • Input Power
    • 11 to 30VDC or 18 to 38 VAC, 350mA max6
  • Output
    • Impedance Voltage mode: < 1 ohm, 20mA max source current
    • Resistance Current mode: 500 ohms maximum load
    • Signal Field selectable 0 to 5V, 0 to 10V, 2 to 10V, 0 to 20mA, 4 to 20mA
  • NIST Certificate Included
  • Time Constant Field
    • Selectable 0.05 to 10 seconds
  • Probe length
    • 3, 6, 9, or 12in (7.5, 15, 22.5, or 30cm)
TSI Air Velocity Transducer 8455-075-1
Velocity Range Field selectable range: 
Model 8455 and 8465 (0.125 to 50.0 m/s) 
Model 8475 (0.05 to 2.5 m/s)
Operating Temp 32 to 140 °F
Power Supply 11 to 30 VDC or 18 to 38 VAC, 350 mA max
Velocity Resolution 0.01 m/s
Velocity Accuracy Model 8455 and 8465 (±(2% of reading at 64.4 to 82.4°F (18-28°C) 
+0.5% of full scale of selected range)) 
Model 8475 (±(3% of reading at 68.0- 82.4°F (20 to 26°C) +1% of full scale of selected range)
Additional Information full scale range, signal output, and time constants are user selectable
Output Field selectable output (0 to 5V, 0 to 10V, 0 to 20V, 2 to 10V, 4 to 20mA)
Time Constant Field selectable (0.05 to 10 second intervals)
UK Mainland Order by 2pm for Next Day Delivery*
Under £25.00 £4.50
Over £25.00 FREE

UK Highlands & Islands Order by 2pm for Next Day Delivery*
Under £80.00 £15.00
Over £80.00 FREE

Recently Viewed