Fluke 771 Milliamp Process Clamp Meter

Product Code: FLU771

Price

£669.95 ex. VAT £803.94 inc. VAT

In Stock

Add To Favourites
Detailed Description

Key Features:

Best in class 0.2 % accuracy
0.01 mA resolution and sensitivity
Measure 4 to 20 mA signals without ”breaking the loop”
Measure mA signals for PLC and control system analog I/O
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements

Save time by NOT breaking the loop on 4-20 mA signal measurements

Milliamp process clamp meters can measure mA signals without breaking the loop. The popular Fluke 771 mA Clamp Meter saves time by making fast, accurate measurements on 4-20 mA signal loops without breaking the circuit.

Fluke 771 Comes Supplied With:

Soft Carrying Case
Users Manual

Are you spending time:

Taking mA measurements by removing a wire and breaking the loop
Calling the control room to isolate a loop
Testing analog input/output on a console
Troubleshooting devices with mA inputs and outputs
Repairing intermittent or erratic 4-20 mA loops
Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 771 Clamp Meters will help you:

Milliamp Clamp Features	Application	How it saves time and money
Measure mA signals for PLC and control system analog I/O without breaking the loop.	Measures low level dc current	Correlate process indication with real physical value
Measure output signals from transmitters without breaking the loop	Maintain and troubleshoot process and automation equipment without breaking the loop	No disruption to the process
Detachable clamp with extension cable	Measurements in tight locations	Enables measurements in difficult situations
Measurement Spotlight	Illuminates hard to see wires in dark enclosures	Measurement process is easier and quicker
Measure up to 99.9 mA range non-contact	Wide range of measurements	Measures 10 to 50 mA signals in older control systems
Automatic power off	After 15 minutes and 2 minute automatic off for backlight and spotlight	Saves battery life

Specifications
Diameter of measurable conductor	0.177” or 4.5 mm max
Operating temperature	-10 to 50 ºC
Storage Temperature	-25 to 60ºC
Operating Humidity	< 90% @ <30 ºC, < 75% @ 30 to 55ºC
Operating Altitude	0 to 2000 m
IP Rating	IP 40
Size	59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.)
Weight	260G, (9.1 oz.)
Vibration	Random 2 g, 5 to 500 Hz
Shock	1 meter drop test (except the jaw)
EMI/RFI	Meets EN61326-1 Note: For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
Temperature Coefficient	0.01% ºC (<18? or > 28?)
Power, battery life	(2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical
Warranty	Three years for electronics one year for cable and clamp assembly
mA measurement (Measured by clamp)	Resolution and Range: 0 to 20.99 mA Accuracy: 0.2% +2 counts Resolution and Range: 21.0 mA to 100.0 mA Accuracy: 1% + 5 counts