TPI 153 Digital Multimeter

Product Code: TPI153

Price

£59.40 ex. VAT £71.28 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Key Features:

DC voltage testing to 1000V
AC voltage testing to 750V
AC/DC current testing to 10A
Resistance testing to 40MΩ
Continuity/diode testing
Auto and manual ranging
MIN/MAX measurement mode
Data hold function
4000 count LCD screen

*Important Calibration Information:
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘traceable calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible, we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required

CALIBRATION	ISS DMM

The TPI 153 Auto-Ranging Digital Multimeter has several advanced features and can measure AC voltage up to 750V, DC voltage up to 1000V, AC current up to 10A, DC current up to 10A, and resistance up to 40MΩ as well as performing diode and continuity testing.

With basic accuracy of ±0.3% and an array of ranges and resolutions for each parameter, the meter ensures reliable, precise readings when inspecting electrical systems. An ultra-high resolution of 0.1µA for current has HVAC-specific applications such as checking smoke detectors.

Min/max recording gives an in-depth look into circuit outputs and auto ranging helps save time and keep readings precise. Readings are displayed on the TPI 153’s large, digital screen and it is easy to operate thanks to a clear dial. Data hold permits a reading to be fixed on-screen.

A strong rubber-boot holster is provided as standard and has a tilt stand for hands-free use. Test leads and fuses are also provided with the TPI 153, which has a safety rating of Cat III 600V. A three-year warranty covers the instrument and it also has a 500-hour battery life with a sleep mode.

The TPI 153 Digital Multimeter Is Supplied With:

TPI 153 Digital Multimeter
Rubber Boot
Test Lead Set
Battery
Instruction Manual

Applications:

Thermocouples in furnaces or gas applications
Heat anticipator current in thermostats
Line voltage
Voltage of direct drive DC motors
Control circuit voltage
Motor run and start capacitors
Flame safeguard control current
Heating element resistance (continuity)
Compressor winding resistance
Contactor and relay coil resistance
Continuity of wiring
Continuity of circuit breakers
Temperature w/ optional temperature adapter
Bar graph to indicate rapid fluctuations in measurements

TPI 153 Digital Multimeter

DC Volts	Maximum Input: 1000V Maximum Resolution: 0.1mV Accuracy: +/-0.3%
AC Volts	Maximum Input: 750V Maximum Resolution: 0.001mV Accuracy: +/-0.8%
DC Amps	Maximum Input: 10A Maximum Resolution: 0.1μA Accuracy: +/-5%
AC Amps	Maximum Input: 10A Maximum Resolution: 0.1μA Accuracy: +/-0.8%
Resistance (Ohms)	Maximum Input: 40MΩ Maximum Resolution: 0.1mΩ Accuracy: +/-0.5%
Frequency	N/A
Capacitance	N/A
Inductance	N/A
Temperature (K-Type Thermocouple)	N/A
Continuity	Audible at less than 50Ω
Diode	3V at 30µA maximum output
Duty Cycle	N/A
True RMS Responding	No
Conductance	No
Pulse Width	No
Data Hold	Yes
Min/Max Record	Yes
Time Stamp Logging	No
Relative Mode	No
Compare Mode	No
RS-232 Output	No
Process Loop Output	No
Sleep Mode / Auto Off	Yes
Protective Boot	Yes (standard)
Display Type	4000 count LCD
Range Selection	Auto / Manual
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	14°F to 122°F (-10°C to 50°C)
Humidity	80% non-condensing
Size	7.4” x 3.4” x 1.2” (187mm x 86mm x 33mm) with boot
Weight	12oz (340g) with boot
Battery Type	1.5V “AA” Alkaline (2)
Battery Life	200hrs Typical
OverInput Category	CAT III 600V
Agency Approval	cULus 61010-1, IEC 61010-1
Warranty	Limited Lifetime