Free Standard Delivery On Orders Over £75 before VAT (Other Services Available)

VAT
Trustpilot
VAT
Trustpilot
Metrel A1532 XA EVSE adapter

Metrel A1532 XA EVSE adapter

Product Code: META1532XA

Price
£465.00 ex. VAT £558.00 inc. VAT

Available In 3-7 Days


Add To Favourites
Detailed Description

Key Features:

  • Banana socket outputs for connection to a 3-phase installation tester;
  • Voltage indicators on EVSE output;
  • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection;
  • Control Pilot resistance selector for simulation of electric vehicle status;
  • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE);
  • Type 2 Male Plug connector for connection to EVSE;
  • 6 mA EV RCD support;
  • Functional tests support;*
  • EVSE AUTO SEQUENCE® support;*
  • MESM report creation;**
  • Load testing up to 13 A on socket - 1 phase or on banana sockets - 3 phase;
  • Fault simulation of Diode short, PE-CP short and PE open;
  • Output BNC connector for CP signal monitoring.

The A 1532 EVSE XA adapter is used for verification of electrical safety and functional testing of EVSE together with supported METREL installation testers. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. XA version supports 3 phase load testing up to 13 A and different error types, including PE open.

If used together with Metrel AutoSequences®, prebuilt in the newer multifunctional testers, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.

A 1532 XA Standard Set 

  • Instrument XA EVSE adapter
  • Small soft carrying bag
  • Instruction manual

Building LV Installation

  • EISinsp Competences: Low Voltage Electrical Installation Safety Inspection
  • EISc Competences: Low Voltage Electrical Installation Safety for Contractors and Maintainers
  • IEC/EN 61557 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series

Electrical Vehicle Supply Equipment

  • EVSE Competences: Electrical Vehicle Supply Equipment Safety
  • IEC/EN 61851 Electric vehicle conductive charging system
  • EVSE construction and testing

Technical Data:

  • Dimensions (w x h x l): 200 x 100 x 70 mm
  • Mass (without accessories): 0.90 kg

Metrel A1532 XA EVSE Adapter Technical Specifications
Input voltage 400 V (3-phase)
Frequency 50 Hz
Test current 267 A (10ms) intermittent operation
Maximum load current 13 A continuous operation
Proximity Pilot (PP) simulation Open circuit
13 A
20 A
32 A
63 A
Control Pilot (CP) simulation State A (not connected)
State B (connected, not charging)
State C (charging without ventilation)
State D (charging with ventilation)
Error states CP short to PE via diode
Diode short
PE open
Overvoltage category 300 V CAT II
Protection degree IP 40
Pollution degree 2
Protection classification Double insulation
Altitude 3000 m above sea level
Dimensions (L x W x H) 250 x 100 x 70 mm
Test lead length 0.5 m
Weight 0.90 kg
Working temperature range 0 °C … 40 °C @ 95 % RH, non-condensing
Storage temperature range -10 °C … +70 °C
Maximum storage relative humidity 90 % RH (-10 °C … +40 °C)
80 % RH (40 °C … 60 °C)

 

UK Mainland Order by 2pm for Next Day Delivery*
Under £25.00 £4.50
Over £25.00 FREE

UK Highlands & Islands Order by 2pm for Next Day Delivery*
Under £80.00 £15.00
Over £80.00 FREE

Related Products

Product Variants