Free Standard Delivery On Orders Over £75 before VAT (Other Services Available)

VAT
Trustpilot
VAT
Trustpilot
Fluke FEV300 EV Charging Station Adapter Plus Type 2 Connector 5347987

Fluke FEV300 EV Charging Station Adapter Plus Type 2 Connector 5347987

Product Code: FLUFEV300TY2

Price
£555.00 ex. VAT £666.00 inc. VAT

In Stock


Add To Favourites
Detailed Description

Key Features:

• Suitable for vehicle charging stations with charging mode 3
• Fits to charging stations with EV socket-outlet type 2 and EV-connectors for type 2 and type 1
• PE Pre-Test: With this safety feature the PE conductor will betested for possible presence of dangerous voltage against earth.
• Proximity Pilot (PP) state “Cable Simulation”: With PP State rotary switch the adapter can simulate various current capabilities of charging cables.
• Control Pilot (CP) state “Vehicle Simulation”: With CP State rotary switch selector all charging states can be simulated.
• Separate phase indication by three LED lamps for easy check if voltage is present at the charging output.
• Measuring terminals L1, L2, L3, N and PE to connect testdevice like installation tester to perform safety and functional tests.

Test and troubleshoot functionality and safety of Level 1 or Level 2 AC electric vehicle supply equipment, easily and reliably

Test the safety and functionality of electrical vehicle charging stations, easily and reliably. The FEV300 Test Adapter Kits are designed to test function and
safety of charging stations mode 3 for AC charging. The adapter imitates an electric vehicle and opens up a charging cycle (activating voltage/current output), allowing you to conduct tests in combination with appropriate test instruments like an installation tester (for example the Fluke 1664 FC) and/or an oscilloscope (for example the Fluke 120B Series Industrial ScopeMeter®). With the FEV300 Adapter Kit, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722.

What's Included?:

This listing is for the FEV300 adapter complete with the type 2 connector only.
Please see our other listings for the FEV300 complete kit with type 1 and 2 adaptors or the FEV300 BASIC.

Related Equipment:

The Fluke FEV300 requires a Fluke FLK-1664 FC Multifunction tester or Fluke 120B Series Industrial ScopeMeter handheld Oscilloscope to operate, please see our related product listings:

  • Fluke 1664 Multifunction tester here
  • Fluke 1664 Multifunction tester + FEV300 test adapter
  • Fluke 123B Scope Meter here

Features and functions:


• Suitable for vehicle charging stations with charging mode 3
• Fits to charging stations with EV socket-outlet type 2 and
EV-connectors for type 2 and type 1
• PE Pre-Test: With this safety feature the PE conductor will be
tested for possible presence of dangerous voltage against earth.
• Proximity Pilot (PP) state “Cable Simulation”: With PP State
rotary switch the adapter can simulate various current capabilities of charging cables.
• Control Pilot (CP) state “Vehicle Simulation”: With CP State
rotary switch selector all charging states can be simulated.
• Separate phase indication by three LED lamps for easy check
if voltage is present at the charging output.
• Measuring terminals L1, L2, L3, N and PE to connect test
device like installation tester to perform safety and functional
tests.
• Compatibility: Integrates into Fluke portfolio of test and measurement tools, by allowing direct connection through FEV
measurement terminals.
• The Fluke 1664 FC allows safety measurements via the
measuring terminals like:
• earth bond
• insulation
• loop/line impedance
• RCD trip test
• Simulation of CP error state “E”
• Simulation of PE error state “F” (Earth fault)
• Terminals for CP signal output to check communication
between adapter (simulated electrical vehicle) and charging
station. This can be measured by a ScopeMeter® or multimeter.
The voltage level defines the charging modes and the duty
cycle of this PWM (Pulse Width Modulation) signal defines the
maximum allowable charging current.
• IP 54 rating - Dust and splashing water protected
2 Fluke Corporation Fluke FEV300 Kits for Electric Vehicle Charging Stations


FEV300 scematic

FEV300 schematic lower

Fluke FEV300 Technical Specification
General features
Input voltage Up to 250 V (single phase system) / up to 480 V (three phase system), 50/60 Hz, max 10 A
Internal power consumption 3 W max.
FEV300-CON-TY2 Plug AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (type 2, 7P three-phase)
FEV300-CON-TY1 Plug AC charging mode 3, suitable to IEC 62196-2 type 1 or SAE J1772 with vehicle con- nector (type 1, 5P single-phase)
Dimensions (H × W × D) 110  × 45  × 220 mm length without connection cable and test cable
Weight (including type 1 or type 2 connection cable) Approx. 1 kg
Safety standards IEC/EN 61010-1, pollution degree 2
IEC/EN 61010-2-030, CAT II 300 V, protection class II
Ingress protection IEC 60529: IP54 (housing)
IEC 60529: IP54 (measuring terminals with protection caps in place, connector/ plug in connected condition or with protection caps in place, otherwise IP20)
Operating temperature -20 °C to 40 °C
Storage temperature -20 °C to 50 °C
Operating humidity range 10 % to 85 % relative humidity non-condensing
Storage relative humidity 0 % to 85 % non-condensing
Operating altitude 2000 m max.
Functions
PE Pre-Test Visible indication >50 V AC/DC between PE conductor and touch sensor
PP Simulation Open, 13 A, 20 A, 32 A, 63 A
CP States State A, B, C, D
CP Error state “E” On/off (CP signal short-circuited to PE)
PE Error state "F" (Earth fault) On/off (interruption of PE conductor)
Outputs (for test purpose only)  
Measuring terminals L1, L2, L3, N, PE Max. 250/480 V, max. 10 A
CP signal output terminals Approx. +/-12 V
UK Mainland Order by 2pm for Next Day Delivery*
Under £25.00 £4.50
Over £25.00 FREE

UK Highlands & Islands Order by 2pm for Next Day Delivery*
Under £80.00 £15.00
Over £80.00 FREE

Related Products

Recently Viewed