Chauvin Arnoux CA6652 Type2 EV Charging Station Adapter

Advantages of the CA6652

• Simulation of vehicle connection and the maximum current accepted by the cable
• Voltage presence indicator light
• Access to the charging station terminals via 4mm banana plugs
• Safety testing of the charging station in fault conditions
• Operator safety ensured by detection of the PE potential by means of a conductor key (stud)
• Availability of the CP signal to detect any communication problems

The IEC 61851-1 standard applies to BEV / PHEV electric vehicle charging stations in low-voltage zones, it covers:

• The operation of EVSE installations
• The connection system between the charging stations and electric vehicles
• Electrical safety of EVSE installations

The CA 6652 adapter is suitable for quick tests on type-2 AC EVSE charging stations because it is particularly easy to implement in the field. Its ability to simulate electric vehicle statuses (CP)
and the various vehicle charging cable configurations (PP) make it ideal for quickly testing all the situations stipulated by the standard.

Lastly, the fault simulation buttons help to ensure EVSE station safety in the event of anomalies between the electric vehicle and the charging system, such as cases where the DC voltage to the CP
(Control Pilot) control signal is not blocked.

Provision of the CP signal on the CA 6652’s terminals Any communication problems between the electric vehicle and the EVSE station are analysed using a HANDSCOPE II or SCOPIX IV
BUS oscilloscope so that the CP signal on the CA 6652’s terminals can be viewed.

Our EVSE solutions, ideal for testing charging installations

To carry out these operations in total safety for the operator, the EVSE decree stipulates a number of measurements.
The operator must have access to the necessary equipment: VAT, universal tester, earth tester, insulation and continuity tester, RCD tester, phase sequence tester and charging station tester.
It is possible to meet these requirements by using an installation tester, a CA 6652 charging station tester and a VAT (voltage absence tester) in combination. It is necessary to test the type-A
RCDs and, on some installations, type-B and EV 6 mA RCDs.
When used together, these 3 instruments provide all the essential measurements needed by EVSE charging station installers.
Grouped in several packs, these measuring instruments correspond to the different levels of intervention, depending on the system to be tested.

Comes Supplied With:

• One CA 6652
• adapter for BEV/PHEV charging stations delivered in a cardboard box containing:
• 1 carrying bag
• 1 cable terminated by a type-2 socket
• 1 multilingual Quick Start Guide
• 1 multilingual safety datasheet
• 1 verification certificate.
The User’s Manual is available for download
from website at www.chauvin-arnoux.com