Megger DET3TC Earth Resistance Tester

Product Code: MEGDET3TC

Price

£659.95 ex. VAT £791.94 inc. VAT

In Stock

Add To Favourites
Detailed Description

Key features:

IP54 protection
Automatic c spike and p spike check
Automatic noise check with noise rejection 40V peak to peak
2-wire and 3-wire testing
ART testing with optional ICLAMP
Resistance range of 0.01 to 2000Ω
Runs on batteries

*Important Calibration Information:
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘traceable calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible, we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

When carrying out test procedures the Megger DET3TC will automatically evaluate and display the status of connected C and P spikes and carries out automatic noise checking/compensates by rejecting noise from 40V peak to peak. When testing earth voltage the device is able to perform tests from 0-100V AC with accuracy of 2% ±2V.

To carry out ART testing this instrument requires the use of an optional clamp (sold separately) that can be attached around the ground rod connection, negating the need to disconnect. All test procedures can be easily selected thanks to a large rotary dial, and a large test button is also built into the device to allow easy and safe test initiation even when you're wearing gloves.

This earth tester isn't just confined to indoors either; the DET3TC features IP54 rating, which means it is suitable for use outdoors as it is protected against dust and water jets.

The DET3TC conforms to EN61010-1 CAT IV 100V, EN61557-1 and EN615557-5.

Megger DET3TC Comes Supplied With:

Megger DET3TC Earth Tester
Hard Carry Case
Stake and Wire Kit

Megger DET3TC
Ingress Protection	IP54
C Spike Check	Automatic
P Spike Check	Automatic
Noise Check	Automatic
Noise Rejection	40V Peak to Peak
2-Wire Test	Yes
3-Wire Test	Yes
No Disconnect Testing (ART)	Yes, requires optional ICLAMP
Earth Current Range with ICLAMP	0.5mA to 19.9A
Earth Current Accuracy	5% ±3 digits
Resistance Range	0.01 to 2000Ω
Maximum Probe Resistance	Rp limit: 100kΩ (50V output voltage) Rc limit: 100kΩ (50V output voltage) Limits reduced to 50kΩ for 25V output voltage Limits reduced to 5kΩ for 0.01Ω resolution on 18Ω range
Earth Voltage Range	0 to 100V AC
Earth Voltage Accuracy	2% ± 2V
Display	LCD
Battery Type	8 x AA Cells
Operating Temperature Range	-15 to 55°C
Storage Temperature Range	-40 to 70°C
Safety	IEC 61010-1 CAT IV 100V* EN 61557-1 EN61557-5
EMC	IEC61326-1
Dimensions	203 x 148 x 78mm (8 x 5.7 x 3.2 inches)
Weight	1kg