Beha-Amprobe ALC-110-EUR TRMS Leakage Current Clamp

Product Code: AMPALC-110

Price

£1349.00 ex. VAT £1618.80 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Key Features:

Following the standard for leakage current clamps IEC/EN 61557-13
Low influence of external low frequency magnetic fields: ≤ 30 A/m, operating class 2 @ IN: 3.500 mA – 600.0 mA
True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
Mechanical lock of the jaw; jaw opening 30 mm (1.2 in)
Highest resolution of 0.001 mA, measure up to 60 A
Selectable filter function removes unwanted noise
Selectable filters:
- Low Pass Filter Function for appliance measuring (acc. IEC/EN 61557-16 amendment A)
- 50/60 Hz filter
- no filter
Broad frequency range 15 Hz to 1 kHz which makes this clamp ideal for a wide range of applications including industrial and railway application
Selectable limits: 0.25 mA, 0.5 mA, 3.5 mA, 10 mA, 12 mA
Max readings and hold function
High safety rating: CAT III 600 V
Auto power-off to save battery life
Backlight display; auto backlight off and auto power off for extended battery life

*Important Calibration Information:
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘traceable calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible, we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Designed according IEC/EN61557-13, VDE 0413-13

The ALC-110-EUR true-rms leakage current clamp meter helps users detect, document and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent RCD/RCCB trips, all without downtime or switching equipment off. The ALC-110-EUR is designed for industrial applications for leakage current testing in installations as well as for appliance testing.

Prevent unplanned downtime by detecting, documenting and comparing leakage current readings over time.

The ALC-110-EUR true-rms leakage current clamp is designed according the relevant standards IEC/EN 61557-13, and helps our customers to keep their business up and running by avoiding unplanned downtime, and identifying intermittent RCD/RCCB trips, all without having to switch equipment off.

The clamp is designed to be able to test leakage current in installations, as well as in appliances.

A special design jaw makes the product very immune to external magnetic fields, which results in much more accurate readings compared to alternative competitive products available in market today.

Applications include the measurement of earth leakage current, differential leakage current, measurement of leakage current through the earth (PE) conductor, tracing the source of earth leakage current, and measurement of current consumption of appliances without interruption to the circuit.

Low frequency magnetic fields	≤ 30 A/m, operating class 2 @ IN : 3.500 mA to 600.0 mA / 40 Hz to 1 kHz
Measurement category	CAT III 600 V
True-rms	Yes
AC frequency	15 Hz to 1 kHz
Low pass filter	50 – 60 Hz, for appliance measuring acc. EN61557-16 amendment A, no filter
Limit judgement	0.25 mA, 0.5 mA, 3.5 mA, 10 mA, 12 mA
Jaw opening	1.2 in (30 mm) max.
Jaw locking	Yes
Backlight function	Yes
Overload protection	60 A
Auto power off	Idle 20 minutes
Auto ranging	Yes
Max hold	Yes
Data hold	Yes
Complies with IEC/EN 61557-13	Yes
Built according IEC/EN 61010-2-032	Yes

Typical Applications:

Measurement of earth leakage current
Measurement of differential leakage currents
Measurement of leakage current through the earth (PE) conductor
Tracing the source of earth leakage current
Measurement of current consumption of appliances in service or customer service sector without interruption to the circuit

Safety Certification:

All Beha-Amprobe tools, including the Beha-Amprobe ALC-110-EUR, are rigorously tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art test lab. In addition, Beha-Amprobe products that measure electricity are listed by a 3rd party safety lab, either UL or CSA.
This system assures that Beha-Amprobe products meet or exceed safety regulations and will perform in a tough, professional environment for many years to come.

Beha-Amprobe ALC-110-EUR TRMS Leakage Current Clamp
Display	Digital: 6000 counts, updates 5/sec
Range	Auto ranging
Over range indication	OL or -OL
Operating temperature	0 °C to 30 °C (32 °F to 86 °F), ≤ 80% RH 30 °C to 40 °C (86 °F to 104 °F), ≤ 75% RH 40 °C to 50 °C (104 °F to 122 °F), ≤ 45% RH
Operating altitude	≤ 2000 m
Storage temperature	-20 °C to 60 °C (-4 °F to 140 °F)
Pollution degree	2
Temperature coefficient	0.1 x (specified accuracy) / °C (<21 °C, >25 °C)
Vibration requirement	acc. IEC 61557-1 clause 4.10
Drop proof	1.2 m (4 ft)
Battery	2x batteries 1.5 V IEC LR03 AAA
Battery life	60 hours typical
Low battery indication	LCD display
Safety compliance	IEC/EN 61010-1, IEC/EN 61010-2-030, IEC/EN 61010-2-032, IEC/EN 61557-13
EMC compliance	IEC/EN 61326-1, IEC/EN 61326-2-2
Dimensions	221 x 89 x 48 mm (8.7 x 3.5 x 1.8 in)
Weight	410 g (0.9 lb) with batteries installed