Fluke i30S AC DC Current Clamp

Product Code: FLUI30S

Price

£632.45 ex. VAT £758.94 inc. VAT

Available In 3-7 Days

Add To Favourites
Detailed Description

Features:

Measurement of both DC and AC current.
Measures up to 30A
Jaw Capacity of 16mm
May be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Electrical specifications

Specified current range

30 mA to 30A dc, 30 mA to 20 A ac rms

Usable current range

5 mA to 30 A dc, 30 mA to 20 A ac rms

Crest Factor

1.4"

Output sensitivity

100 mV/A

Accuracy (at +25 °C)

± 1 % of reading ± 2 mA

Resolution

± 1 mA

Load impedance

> 100 kΩ

Conductor position sensitivity

± 1 % relative to center reading

Frequency range

DC to 100 kHz (- 0.5 dB)

Phase shift below 1 kHz

< 2 degrees

Temperature coefficient

± 0.01 % of reading/°C

Power supply

9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator

Working voltage (see Safety Standards section)

300 V ac rms or dc

General specifications

Maximum conductor size

19 mm diameter

Output connection

Safety BNC connector, supplied with safety 4 mm adapter

Output zero

Manual adjust via thumbwheel

Cable length

2 meters

Operating temperature range

0 °C to +50 °C

Storage temperature range (with battery removed)

-20 °C to +85 °C

Operating humidity

15 % to 85 % (non-condensing)

Weight

250 g

Safety standards

	BS EN 61010-1: 2001
	BS EN 61010-2-032: 2002
	BS EN 61010-031: 2002
	300 Vrms, Category III, Pollution Degree 2
	Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequencies below 1 kHz.

EMC Standards

EN 61326: 1998 +A1, A2, & A3

UK Mainland	Order by 2pm for Next Day Delivery*
Under £25.00	£4.50
Over £25.00	FREE

UK Highlands & Islands	Order by 2pm for Next Day Delivery*
Under £80.00	£15.00
Over £80.00	FREE