Free Standard Delivery On Orders Over £75 before VAT (Other Services Available)

VAT
Trustpilot
VAT
Trustpilot
Amprobe ACD-10 Plus 600A AC Clamp Meter

Amprobe ACD-10 Plus 600A AC Clamp Meter

Product Code: AMPACD10PLS

Price
£63.25 ex. VAT £75.90 inc. VAT

In Stock


Add To Favourites
Detailed Description

Supplied With:

  • Amprobe AC-10 PLUS Clamp Multimeter
  • Test leads
  • Battery (Installed)
  • Soft Carrying Pouch
  • User Manual


*Important Calibration Information:
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘traceable calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible, we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Amprobe's ACD-10 is also a fully functional digital multimeter; connect up your test leads and you'll also be able to measure AC/DC voltage to 600V, resistance to 40MΩ, capacitance to 3000μF and also perform continuity, frequency and inrush current measurements
Built with thin jaws, Amprobe's ACD-10 is excellent for clamping around smaller wires, or for getting a secure connection around wires in cramped environments

The ACD-10 PLUS Comes Supplied With:

  • Amprobe AC-10 PLUS Clamp Multimeter
  • Test leads
  • Battery (Installed)
  • Soft Carrying Pouch
  • User Manual


Amprobe’s ACD-10 PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25 mm. It also measures Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeter. Additional functions of this clamp meter include a HOLD function (stores current value shown on the screen), MAX function and auto-ranging. The jaws are just 10mm  thick and can be attached to conductors with maximum diameter of 25mm

AC Voltage 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current 40.00 A, 400.0 A, 600 A
Resistance 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ
Capacitance 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Accomodates Conductors up to 1.0''(25 mm) in diameter
Display 3-3/4 digits 4000 counts LCD display
Update Rate 3 per second nominal
Polarity Automatic
Operating Temperature °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude Operating below 2000m; Indoor use
Storage Temperature -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature Coefficient nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low Battery Below approx. 2.4V
Power Supply 3V coin battery IEC-CR2032
Power Consumption 2.8 mA typical except that 3.3 mA typical for ACA function
APO Timing Idle for 30 minutes
APO Consumption 5 µA typical
Jaw Opening and Conductor Diameter max 26 mm
Special Features 30ms Max Hold; Data Hold; Relative Zero mode

UK Mainland Order by 2pm for Next Day Delivery*
Under £25.00 £4.50
Over £25.00 FREE

UK Highlands & Islands Order by 2pm for Next Day Delivery*
Under £80.00 £15.00
Over £80.00 FREE

Recently Viewed